KINGTOP MCMMeasurement consumables
+86 188 9004 9873Get a quote

Magnetic Marker Points & Reference Cubes

Magnetic marker points, reference cubes and magnetic marker balls for ferrous parts — no adhesive, no residue, repositionable during scan planning.

8 stock models
24 h quotation
OEM private label
Overview

Machined parts arrive oily, warm and residue-sensitive. Adhesive lifts, leaves film on datums and dies after a heat cycle; magnetic points snap on and come off clean.

Reference cubes give a fixture datum that returns identically next month, so sessions merge without re-alignment.

  • No adhesive, no residue on machined surfaces
  • Repositionable while planning the scan
  • Reference cubes for repeatable datums
  • Sizes from 3 mm to 16 mm inner
Magnetic marker point set Magnetic reference cube Magnetic marker point Magnetic marker point
Specifications

Every stock model, in one table

Filter by model, size or thread. Rows are the stock build; custom geometry is quoted separately.

8 models
ItemSizeType
——Magnetic marking points for each model
——Magnetic reference cubes (3D scanning sp
—Inner 6.0mm Outer 10mmHigh reflective marking point series
—Inner 3.0mm Outer 6.0mmMagnetic Marking Point Series
—Inner 6.0mm Outer 10mmMagnetic Marking Point Series
—Inner 12mm Outer 19mmMagnetic Marking Point Series
—Inner 16mm Outer 25mmMagnetic Marking Point Series
——Scan magnetic marker ball

Dimensions are catalogue values in millimetres. Need a variant that is not listed? Send the drawing — custom diameters, threads and pack counts are available at bulk quantity.

Details

The parts, close up

Photographs from the same production run, plus the drawings we quote from.

Coded magnetic frames arranged on a steel plate
Coded frames on steelMagnetic backing snaps to ferrous parts and lifts off without leaving adhesive.
Reflective points on a magnetic sheet, close-up
Point geometry, close upSame coated stock as the marker line, cut to the coded layout.
FAQ

Questions buyers ask

Do magnets affect the scanner?

Passive optical and laser scanners are unaffected by static magnets. Keep magnetic targets away from magnetic encoders or compasses on the part itself.

Will they hold on painted or oily steel?

Holding force drops with paint thickness and surface film. For thick paint or oily surfaces, specify the high-gap variant when ordering.

Get a factory quote within 24 hours

Send sizes, threads and quantities — or just the scanner or tracking system you run. We answer with a specification match, MOQ and factory pricing.

Request a quote
CatalogueRequest a quote