Marker Bases, 9–20 mm (KJ Series)
Nine KJ bases from 9 to 20 mm with 1–5 mm posts, lifting a marker clear of tape lines, edges and curved shells.
The base is a weighted disc with a threaded post. Its job is to give the camera a clean sphere instead of a half-occluded one.
Model codes read directly: KJ + disc diameter + post height + thread, so a drawing converts to an order without a lookup.
- Discs 9–20 mm, posts 1–30 mm
- M2 / M3 / M4 threads
- Low centre of gravity resists kick-off
- Black finish kills stray reflections




Every stock model, in one table
Filter by model, size or thread. Rows are the stock build; custom geometry is quoted separately.
| Model | Base Ø | Post height | Thread |
|---|---|---|---|
| KJ09W01HM2 | 9mm | 1 mm | M2 thread |
| KJ095W05HM3 | 9mm | 5 mm | M3 thread |
| KJ12W01HM3 | 15mm | 1 mm | M3 thread |
| KJ15W05HM3 | 15mm | 5 mm | M3 thread |
| KJ15W01HM4 | 15mm | 1 mm | M4 thread |
| KJ15W05HM4 | 15mm | 5 mm | M4 thread |
| KJ15W15HM4 | 15mm | 15 mm | M4 thread |
| KJ20W05HM4 | 20mm | 5 mm | M4 thread |
| KJ20W30HM4 | 20mm | 30 mm | M4 thread |
Dimensions are catalogue values in millimetres. Need a variant that is not listed? Send the drawing — custom diameters, threads and pack counts are available at bulk quantity.
What the models look like








Questions buyers ask
How do I read a KJ code?
KJ09W01HM2 = 9 mm disc, 1 mm post, M2 thread. Every stock combination is listed in the table.
Can bases be adhesive mounted?
Yes — add double-sided tape to the underside for non-ferrous, non-threaded surfaces.
Related pages
Get a factory quote within 24 hours
Send sizes, threads and quantities — or just the scanner or tracking system you run. We answer with a specification match, MOQ and factory pricing.