Setting Up Magnetic Targets on Ferrous Parts
Why magnetic beats adhesive in the shop
Machined parts arrive oily, warm and residue-sensitive. Adhesive lifts on oil, leaves film on datums and dies after heat cycles. Magnetic points snap on clean or oily steel, reposition during planning, and leave nothing behind.
A layout that solves first try
Spread points across the whole scan envelope, not just the region of interest; keep three or more points visible in every scanner pose; avoid symmetric layouts that let the solve flip; add a reference cube at the fixture datum so sessions merge without re-alignment.
Holding-force checks
Paint thickness, curvature and surface film all cut holding force. Tug-test each point after placement; on curved or painted surfaces use the high-gap variant or add a mechanical stop.
After the scan
Pull points straight off — no twisting on polished datums. Store cubes with their fixture so the datum returns identically next month. Wipe with a dry cloth; solvents attack the reflective shell.
| Step | Action | Check |
|---|---|---|
| 1 Prep | Degrease loose oil, leave film | Point snaps flat |
| 2 Layout | 3+ points per pose, asymmetric | Solve does not flip |
| 3 Datum | Reference cube at fixture zero | Sessions merge |
| 4 Verify | Tug-test vertical faces | No slide |
Related pages
Get a factory quote within 24 hours
Send sizes, threads and quantities — or just the scanner or tracking system you run. We answer with a specification match, MOQ and factory pricing.
